PRODUCTION, TECHNOLOGY AND RESEARCH|technology and technical regulations|technical regulations · TRANSPORT|organisation of transport|means of transport
PRODUCTION, TECHNOLOGY AND RESEARCH|technology and technical regulations|technical regulations · TRANSPORT|organisation of transport|means of transport
Sainmhíniú wheel that is 45 to 50 mm in diameter and 12.5 mm thick, composed of a special finely-screened abrasive embedded in a medium-hard rubber Tagairt UNECE Regulation No. 43 (safety glazing materials), Revision 2 - Amendment 4
Nóta The wheels shall have a hardness of 72 ± 5 IRHD, as measured at four points equally spaced on the centreline of the abrading surface, the pressure being applied vertically along a diameter of the wheel and the readings being taken 10 seconds after full application of the pressure.
PRODUCTION, TECHNOLOGY AND RESEARCH|technology and technical regulations|technical regulations · TRANSPORT|organisation of transport|means of transport
PRODUCTION, TECHNOLOGY AND RESEARCH|technology and technical regulations|technical regulations · TRANSPORT|organisation of transport|means of transport
Sainmhíniú Reinigungsmethode, bei der das Strahlmittel unter Druck mit Wasser vermischt und auf das Produkt gestrahlt wird Tagairt "COM-DE gestützt auf: Leering > Was ist Nassstrahlen und wann wird ein Nassstrahler verwendet? (4.12.2020)"
Nóta Eine Mischung aus Wasser, Strahlmittel und eventuell einem biologischen Fettlöser wird bis zur Strahlpistole nach oben gepumpt, wo über einen Luftinjektor Druckluft hinzugefügt wird. Mit dem dadurch entstehenden, kräftigen Strahl wird die Fläche bearbeitet.
Sainmhíniú use of an abrasive media and compressed air to achieve a desired finish on a chosen surface where the abrasive media is mixed with a liquid Tagairt "COM-Terminology Coordination, based on Vapormatt, 'What is wet blasting?' (17.2.2021)"
Nóta Unlike dry blasting, wet blasting (or vapormatting) uses a third element – liquid – to enhance the levels of surface finish that can be achieved. The benefit of including water is a much smoother and more consistent finish.
Sainmhíniú procédé de nettoyage par lequel un jet d'eau additionné d'abrasif est dirigé à grande vitesse par l'air comprimé sur la surface choisie, donnant une finition lisse et satinée Tagairt "COM-FR, d'après:- DeviceMed > Equipements de production & Techniques de fabrication > Travail des métaux (8 novembre 2019) > Sablage humide : un procédé adapté au traitement de surface de DM (16.7.2020)- Jean Brel > Conseil > Sablage > Qu’est-ce que le sablage humide et quelles sont ses applications? (16.7.2020)"
PRODUCTION, TECHNOLOGY AND RESEARCH|technology and technical regulations|technical regulations · TRANSPORT|organisation of transport|means of transport